Welcome to our guide on feeder fishing in cold water – the gear, tactics, and techniques you need to know to catch bream and other species when the water is cold.

Cold water can present a number of challenges for anglers, but with the right approach and equipment, it is possible to have a successful and rewarding outing.

In this guide, we will be exploring the best gear and techniques for feeder fishing in cold water, including the use of PVA, pellets, and other baits and rigs.

Let's get started and learn about feeder fishing in cold water – the gear, tactics, and techniques you need to know!

At cold times, the fish roam the shallower places just to bask in the sun during the warm hours of the day, and the rest of the time they group in the depths of the ponds and are already quite lazy. This means that it will not bite as quickly and sharply as summer does, nor will it be active.

Honestly, if we have a few strokes, that's fine. That is why we must be patient and not rush to fold with swearing. The conditions are different and that is why any shaking of the tip is especially valuable.

Fishing in cold weather requires careful preparation and the use of mounts that will feed the spot properly and allow us to detect fish. We will consider four types of installations.

Feeder Fishing in Cold Water Mobile set up

Mobile set up with increased resistance. The option is quite interesting and simple, it will avoid entanglement and in general, there are not many differences from the usual mobile installation. If you have read this or that on the issue of feeding fish, you will easily guess why this installation is especially suitable in cold water.

[caption id="attachment_1548" align="aligncenter" width="231"] Feeder Fishing in Cold Water Mobile set up[/caption]

The principle of detection works in the fixed installation. The fish has taken the bait and is moving away, but he feels the weight and tries to get rid of it. It will be difficult to succeed, as the hook is already stuck in her mouth. In cold water, however, the carp is quite slow and will not move fast enough to catch, ie there will be a chance to spit out the bait and escape. However, this will not happen with movable installation. Use a little lead and when the fish leaves, it will feel something wrong, but it will be too late.

The main fiber is passed through a swivel, and a carabiner is attached to it. A silicone stopper is strung behind the swivel, and another swivel, but very small, is tied behind it. That's the reason. The lead is attached to the carbine, and the weight is selected according to the casting distance.

The stopper acts as a buffer and does not allow the entanglement of the swivels. The length of the line can vary and depends on the bait. If you are going to catch carp up to 1.5 kg, tie a line about 45 cm. Corn or pellets are used as bait. Feeding is risky because the metabolism of fish is very slow and you can easily feed them, but you would be interested in brighter bait.

Feeder Fishing in Cold Water: Paternoster

Paternoster with worm feeder. It is not a universal option, but it is good if you want to feed on white or colorful worms and are looking for bream, granny and carp. Exactly the size of the paternoster bench is a moot point, and every fisherman has his own preferences.

[caption id="attachment_1549" align="aligncenter" width="300"] Feeder Fishing in Cold Water: Paternoster[/caption]

But if you have not used such an installation before, make a loop about 30 cm and tie it tightly (do not forget to spit the knot). Cut the loop so that you get two unevenly long leashes, the short one can be about 15 cm. A swivel with a carabiner is attached to it, to which the feeder is attached. At the long end, another ball is made and the hook with the hook is tied to it through a loop in a loop.

The lead can be about 45 cm, and the hook should be small - №16-18. The best bait will naturally be a white worm or with pink.

In the first throws, you need to feed intensively, and then you will judge the supplementation according to the bite. However, if mullets turn, keep in mind that they are very greedy and will pick up white worms like vacuum cleaners in minutes. It is not uncommon for the caught mullet to vomit worms, so it is crowded. So it must be replenished with each throw.

An asymmetrical bream trap is tied when the fish is detected due to the resistance of the feeder basket. Here, however, the line must be short - a maximum of 30 cm, and even not more than 15 cm. In general, this installation is used for small fish fishing.

How is the installation done?

We pass the main fiber through a swivel and make a loop tied with a "triple eight", that is, you pass the double fiber three times. Note that the swivel must remain inside the bench. Pull it close to the main knot and make another one about 5 cm behind it. This leaves the swivel in a small ball. On the big bench, make two more knots every 4 cm and you're done.

Mimilure Inline Method Feeder Set Carp Fishing Tackle 4

[caption id="attachment_1553" align="aligncenter" width="362"] Method Feeder Set[/caption]

Buy Here

We pass the main fiber through a swivel and make a loop tied with a "triple eight", that is, you pass the double fiber three times. Note that the swivel must remain inside the bench. Pull it close to the main knot and make another one about 5 cm behind it. This leaves the swivel in a small ball. On the big bench, make two more knots every 4 cm and you're done.

The feeder is attached with a carabiner to the swivel, and the leash is spliced ​​to the last loop. You can start with an occasion of about 30 cm, and then change it depending on the bite. A white worm stretched white worm or a piece of manure worm is used for bait. You can add worms and casters to the feed mixture.

Feeder Fishing in Cold Water With PVA

Feeder fishing in cold water with PVA (polyvinyl alcohol) can be an effective way to catch bream and other species. PVA is a water-soluble material that can be used to create a variety of bait and rig presentations, including PVA bags, PVA mesh, and PVA sticks. When fishing in cold water, PVA can be especially useful for creating a slow-dissolving bait presentation that can attract and hold the attention of the fish.

Steps For Use PVA

To use PVA for feeder fishing in cold water, you can follow these steps:

1. Select a suitable PVA product for your needs, such as PVA bags, mesh, or sticks.
2. Choose a bait or attractant to use with your PVA, such as groundbait, pellets, or particles.
3. Fill your PVA bag, mesh, or stick with the bait or attractant, being careful not to overstuff it.
4. Attach the PVA to your feeder rig, using a knot or clip to secure it in place.
5. Cast your feeder rig into the water, allowing the PVA to dissolve and release the bait or attractant as it sinks.
6. Monitor your line and feel for any bites, and be prepared to adjust your bait or rig as needed to find and catch fish in the cold water.

[caption id="attachment_1551" align="aligncenter" width="451"] Mounting for PVA and pellets[/caption]

Mounting for PVA and pellets can be used with both a feeder and lead, which is attached with a clip. It is good to be smaller, as the swivel and carabiner rotate and you will avoid annoying entanglements.

[caption id="attachment_1552" align="aligncenter" width="467"] Mounting for PVA and Boilie[/caption]

The clip rests on the main fiber, and at the end of the line, a swivel is tied with a carabiner. The lead is attached to the clip and the 30 cm lead is attached to the carbine. You can also use a loop in a loop, but the option with a carbine will allow you to change the reins very quickly. The hook is around №12-14.

Conclusion

In conclusion, feeder fishing in cold water can be a challenging but rewarding experience for anglers.

By using the right gear, tactics, and techniques, you can increase your chances of success and have a more enjoyable and productive fishing outing.

Thank you for reading, and we hope you have a great time feeder fishing in cold water!