Welcome to our guide on the Gardner loop for feeder – advantages, and disadvantages!
The Gardner loop is a popular and effective knot that is commonly used for attaching feeder rigs to the main line when fishing with a feeder. It is a strong and reliable knot that is relatively easy to tie, making it a popular choice for many anglers.
In this guide, we will be exploring the benefits and drawbacks of the Gardner loop, so you can make an informed decision about whether or not it is the right knot for you.
So let’s get started and learn about the Gardner loop for feeder – advantages, and disadvantages!
What are the characteristics of a Gardner loop?
One of the most popular pieces of equipment among people involved in sports and just amateurs is a Gardner loop for a feeder, how to knit it, many are wondering. The fact is that, despite its commonness, it requires certain knowledge when knitting. In addition, it is worth getting acquainted not only with the rules for creating fishing tackle but with its advantages and disadvantages.
This loop is so named because it was introduced by Steve Gardner, who is a famous feeder and floater. Previously, a similar invention was also used, but it was he who systematized and popularized it. Today, this installation is the most common, and almost everyone knows it.
Speaking about the Gardner loop, the following features should be highlighted:
- With the help of this product, ordinary donks are also mounted, so it is used not only during the classic feeder. With it, you can completely abandon any wire branch or anti-twisting tube.
- This equipment allows you to use the most common lead sinkers, without a feeder. This will be appropriate when catching roaches during the pre-spawning run. Then the bait does not always justify itself, so many fishermen have to give it up.
- The main feature of the loop is self-securing. So, when the fish grabs the bait, the fishing line begins to stretch and is detected when the leash hits the feeder. At this time, the main task for the fisherman is additional hooking, and after that – hauling. It’s great if during this time the river inhabitants behave actively.
- When the fish is passive and reluctant to take the bait, then the use of the loop will lead to idle bites. Fish, especially bream, will start to spit out the bait when they feel even the slightest resistance. For this reason, many anglers lengthen their leashes, which, unfortunately, does not always save the situation. Therefore, you will have to use another feeder equipment.
This, when catching passive river dwellers, it is worth using a different rig. The Gardner loop for the feeder has a low sensitivity, which should also be taken into account.
However, the bite with this product is fixed well, but not in the case of passive fish.
Advantages and Disadvantages
Like any other fishing tackle on the feeder, the gardener loop has its pros and cons.
So, paternoster has the following positive features:
- The loop is easy to use, it is very easy to tie, and the installation of the equipment does not take much time;
- The product has a low probability of overlapping when casting, this is practically impossible, which cannot be said about the asymmetric loop, which often overlaps when casting;
- This model is perfect for the current, as well as in the case of a closed reservoir;
- Paternoster, unlike any other loop, is knitted immediately on the reservoirs before you start fishing;
- Additional swivels will not be needed, since one will be enough for the feeder;
- For knitting, both a monofilament fishing line and a braided cord are suitable.
Among the significant drawbacks, it should be noted that the paternoster cannot be attached through a swivel to the main line, it must be knitted directly on it. For this reason, the equipment can twist the line. This problem can be dealt with.
So, you need to throw and get tackled from the water several times, while raising the feeder. At this time, the fishing line will unravel on its own. Another disadvantage is the low sensitivity compared to other similar gear. Therefore, to notice how the fish are biting, it needs to move the feeder, which should be of minimum weight.
Before choosing a gardener loop for fishing, you should definitely familiarize yourself with its features, as well as the positive and negative sides.
How is the Gardner Loop Knitted?
The Gardner loop for the feeder is very easy to use, all fishermen need to know how to knit it. There are several ways.
- To do this, you need to take the end of the fishing line and tie a small loop on it (length – up to 3 cm), to which the leash and hook will be fixed.
- Then an indent is made from a small loop (15 cm) and a large one is knitted, the length of which will be up to 10 cm. A feeder is fixed to it.
- This is the last stage of this feeder loop, after which the feeder with a leash and a hook is installed. Equipment can be thrown. In this case, the feeder is better attached not directly to the loop, but through the swivel.
You can use different instructions and knit tackle in slightly different ways. The following instructions must be strictly followed.
So, a piece of fishing line is taken and a small loop is made, it is necessary to fix the mount to the main line. Then the fishing line itself should be folded in half and tied in a loop, the length of which will be up to 20 cm. After that, the connected fishing line is cut in a ratio of 1: 2.
In the long shoulder, namely at the end, a small loop is knitted. It is needed to fasten the leash to the hook. At the end of only now a short shoulder, a so-called clinch is made, or a swivel and a carabiner are tied in the same way to fasten the feeder.
But the paternoster is knitted a little differently, here the scheme is different.
First, a loop is made for fixing the main fishing line. In the middle of the finished segment, a large loop (up to 10 cm) is knitted, which is put on the feeder. The tackle on the feeder is held by a small loop designed for the main fishing line and an area is marked below the feeder by 3 cm. A small loop is made in this place, which is needed for the leash.
You can use the knitting method, which is called a helicopter. It is necessary to put a stopper made of rubber on the fishing line, then the swivel is mounted, and then the stopper again.
In this case, the distance between them should be up to 20 cm. In the end, a loop is knitted, which is intended for the feeder. After the leashes are attached to the swivel. The important thing here is that the feeder will not interfere with recognizing a bite.
The rig can be made with an anti-twist. It uses a plastic tube that has a bend. A line is passed through it. The feeder must be attached near the end of the tube. The leash is fixed directly through the swivel. A loop is made on top of the tackle for fixing the main fishing line. By bending the plastic tube, the fishing line and leash are retracted to the side of the feeder.
You should know that such loops are universal. They can be used for standing water while hunting for crucian carp or in the river for bream fishing.
Such loop knitting methods are the most common and simple. However, it is important to follow the instructions clearly and take into account all the nuances.
In conclusion, the Gardner loop is a popular and effective knot that is used for attaching feeder rigs to the main line when fishing with a feeder.
While the Gardner loop has many advantages, including its strength and ease of tying, it also has some disadvantages to consider. One disadvantage is that the knot can be bulky, which can affect the presentation of the bait or lure and make it more difficult to cast.
Overall, the Gardner loop is a useful knot to have in your fishing toolkit, but it is important to weigh the advantages and disadvantages to determine if it is the right choice for your needs. By understanding the strengths and limitations of the Gardner loop, you can make informed decisions about which knots to use when fishing with a feeder.
This post may contain affiliate links which means I may receive a commission for purchases made through links.