Choosing the right lure for spinning can make all the difference when it comes to catching fish.

Whether you're fishing for bass, trout, or other species, the right lure can entice fish to bite and make for a successful fishing trip. With so many different types and styles of lures on the market, it can be overwhelming to know where to start.

In this article, we'll take a look at the key factors to consider when choosing a lure for spinning.

[caption id="attachment_1807" align="aligncenter" width="300"] How to choose a lure for spinning?[/caption]

On the shelves of fishing stores, there is a huge selection of lures for catching pike, perch, pike perch and an amateur fisherman is involuntarily puzzled by the question: how to choose a lure for his spinning?

If the buyer does not have at least minimal knowledge about spinners and the habits of fish, then only two selection criteria are available to him: the beauty of the spinner and its price.

But there is a difference in which spinners to use in spring or autumn. There is also a difference in the use of spinners in shallow water and at depth. Experienced fishermen believe that it does not matter what color the lure is used - in clear or cloudy weather. In order to choose the right set of artificial lures, you need to understand

How to choose a lure for spinning: Lure?

[caption id="attachment_1808" align="aligncenter" width="300"] How to choose a lure for spinning: Lure?[/caption]

Spinner fishing has been known since the century before last. This is evidenced by a legend about how people thought of catching on metal artificial lures: someone dropped a spoon into the water and saw a pike rush to its shine (that's where the name comes from - lure).

Arriving home, the future fisherman broke off the handle of the spoon, tied an old similarity of the current forest on one side (most often horsehair was used as a fishing line), and on the other, a forged hook. It turned out a prototype of a modern spinner. There was no need to excel as baits then - there were many times more fish in rivers and lakes than in modern times.

By and large, there are only two types of spinners:

• Hesitant;
• Rotating.

An artificial metal bait that looks like a fish is called a spinner. A tee hook is attached to one side of the metal fish by means of a winding ring (sometimes an ordinary hook is hard soldered), a leash (usually metal) is also attached to the other through the ring, to which and a spinning line is tied. This is what a spinner looks like.

Such baits are called spinners due to the fact that the body of a metal fish is almost always slightly curved in the longitudinal and transverse directions. Thanks to these curves of the spinner, the bait in the water creates oscillating movements, imitating a live fish with its behavior.

The movement of the spinner in the water is called the game of bait by anglers. The more the game of the spinner resembles the movement of a live fish in the water, the more catchy it will be.

A spinning lure is more complex than an oscillating lure. A metal petal is attached to a rod with a length of two to five centimeters, which, when moving in water, rotates around an axis. On one side of the rod, there is a tee hook, on the other - the rod is bent into a ring, to which a leash is attached by means of a carabiner and a swivel. To give the necessary weight to the bait, the rod is weighted with a core.

There are two types of spinners - oscillating and rotating. In common parlance, they are called oscillators and turntables. The catchability of spinners does not depend on the similarity of the appearance of the bait with a real fish but on their game.

How to choose a lure for spinning: Spoon's

A few details about spinners. Spinners are a very common type of artificial bait for catching predatory fish species. They appeared in the set of lures for spinning rods much earlier than spinners, wobblers, jig attachments, and so on.

As mentioned above, the oscillating lure is a curved metal plate. A tee hook is attached to it on one side (occasionally an ordinary one is attached), on the other, a leash with a swivel is attached to it by means of a clockwork ring. The thickness of the metal plate can be different, but, as a rule, it rarely happens that it is more than three millimeters. They make oscillating baits from a wide variety of metals.

Fishing Lures Kit for Freshwater Bait Tackle Kit

[caption id="attachment_1810" align="aligncenter" width="300"] How to choose a lure for spinning: Lure Kit[/caption]

Buy Here

How to choose a lure for spinning LureTypes:

• Copper;
• Bronze;
• Aluminum;
• Lead;
• Stainless steel;
• From cupronickel (this material is rarely used);
• From metal alloys.

The oscillator can be made of stainless steel, but have a coating of:

• Enamels;
• Nickel;
• Silver;
• Chromium;
• Gold (very rare).

Spinners are indispensable if you need to catch large areas of the reservoir. They are often used for trolling fishing, or, as they used to say, for the track.

With such fishing from a boat or motor boat, they throw a couple of lures into the water, as a rule, with two spinning rods and start moving.

In this way, large areas of the reservoir are “combed”, and fishing is rarely ineffective. Although other lures, such as wobblers, are replacing trolling fishing gears, they should not be discounted.

Heavy spoons are used for spinning fishing by casting the bait over a long distance. The best spinners for such fishing are spinners called "Castmaster", which in translation from English means "casting master". They can be used for casting, even if the spinning is equipped with an inertial reel, it rarely happens that a “beard” will happen from the fishing line.

Lighter spinners are caught throwing over short distances in shallow water near reeds. It often uses oscillators-non-hooks with an ordinary hook. In order for the bait not to catch, a narrow elastic plate is soldered to the beginning of the spinner, which adjoins the tip of the hook from the inside. It is she who prevents the lure from clinging to everything that is horrible at the bottom but is squeezed out when a predator rushes to the bait.

Experienced anglers are good at catching homemade spoons. The manufacture of the simplest oscillating lures is not fraught with any special difficulties. We select a plate from the desired metal of the required thickness, cut out the desired figure from it, give it a bend, and drill holes at the ends of the processed plate for attaching the tee and the leash. The simplest oscillating baubles are ready. Of course, more complex jigsaws are not so easy to make, and in order to make them, you need skill and quality tools.

Spinners are universal spinners. They are suitable for both trolling and throwing. They can fish both in deep and shallow water. Homemade unsightly spoons are often more catchy than amazingly beautiful factory lures.

How to choose a lure for spinning: Spinners

The spinner is designed as follows: a metal petal is attached to a wire pin with a bow, which, when wired in water, will rotate around an axis. A tee hook is attached to one side of the pin, and a leash is placed on the other side with a carabiner with a swivel. Also on the wire axis is a core to give a certain weight to the bait.

10pcs Fishing Lure Spinnerbait

[caption id="attachment_1811" align="aligncenter" width="260"] How to choose a lure for spinning: Spinners[/caption]

Buy Here

Spinners are currently classified according to the shape of the petal and the type of load. The famous company Mepps introduced the classification of spinners according to the shape of the petal.

Now, almost all other artificial lure manufacturers adhere to the same classification.

So, petal-shaped turntables:

• Long (long) - the petal is elongated, similar to a willow leaf. These turntables go well into the depths. The petal does not stop rotating even with slow wiring;
• Comet (comets) - a more rounded petal. The bait is universal, it can be used both in the current and in stagnant water. It is these spinners that can be advised to novice anglers who do not yet
• have a set of favorite turntables they have selected in the box;

According to the type of loading, turntables are:

• Front loaded;
• Back loaded;
• Unloaded.

In front-loaded turntables, the weight is located between the petal and the leash mount. For spinning fishing, a front-loaded lure is good because it is convenient to cast it over a long distance. The petal begins its rotation even when it sinks to the bottom. In rear-loaded lures, the weight in the form of a core is located between the tee hook and the petal. It is the most versatile type of turntable. There is no weight in unloaded lures.

Often such spinners are used when fishing in the gaps of reed thickets due to the fact that they are a little prone to hooking on the bottom. An unloaded bait can easily be turned into a front-loaded bait by attaching a removable weight to it with a carabiner.

Experienced fishermen, before starting to choose the right turntables for the next fishing trip, try to take into account many factors, for example, the bottom topography of the future fishing spot.

Do not use a heavy spinner in shallow water. If the purpose of fishing is pike, then it is better to use turntables with a more rounded petal. For perch, you should pick up small spinners.

Conclusion

Choosing the right lure for spinning can make all the difference when it comes to catching fish. Whether you're fishing for bass, trout, or other species, the right lure can entice fish to bite and make for a successful fishing trip.

With so many different types and styles of lures on the market, it can be overwhelming to know where to start.

In this article, we'll take a look at the key factors to consider when choosing a lure for spinning. We'll cover the different types of lures available and their specific uses, as well as factors such as the water conditions and the species of fish you're targeting.