Catching bream on the Feeder


11 min read

Catching bream on the Feeder? Bream are a type of freshwater fish that can be found in lakes and rivers across Europe and Asia. They are a popular target for anglers due to their fighting spirit and tasty flesh. Bream can be caught using a variety of methods, but one of the most effective is to use a feeder. A feeder is a device that releases small pellets of bait at regular intervals, attracting fish to the area.

The basics of catching bream on the feeder

Bream, also known as silver bream, is a species of fish in the family Cyprinidae. They are found in freshwater environments throughout the world and are a popular target for anglers. Feeder fishing is a type of fishing where anglers use a feeder device to dispense bait at a specific location in the water.

Feeder fishing is an effective way to catch bream, as they are attracted to the bait that is dispensed from the feeder. There are a few things to keep in mind when catching bream on the feeder.

[caption id="attachment_2318" align="aligncenter" width="300"]The basics of catching bream on the feeder The basics of catching bream on the feeder[/caption]

Type of bait

Breams are attracted to a variety of baits, including worms, maggots, and small pieces of fish. It is important to experiment with different baits to see what the bream in your area are biting on.

Place the feeder in the correct location

Breams are typically found near structures in the water, such as logs, rocks, and vegetation. By placing the feeder in an area where bream are likely to be, you increase the chances of getting a bite.

Having patience when fishing with a feeder

Bream can be timid fish, and it may take a few minutes for them to come to the bait. Once they start biting, however, they can be quite aggressive, so it is important to be patient and

Fishing with spring for bream

How to make the right rod for bream fishing?

Choosing the right rod and its components will help you catch big fish:

Catching bream on the Feeder: Rod

The length and test of gear are the main parameters that you should pay attention to when fishing for bream. The longer the rod, the further the cast. The optimal length is 3.5 meters, and the test is from forty to eighty grams.

Catching bream on the Feeder: Reel

Buy Here

You should purchase a good reel, with free movement, uniform winding of the fishing line, and no beard ejection.

Catching bream on the Feeder: Fishing line

When fishing, it is better to use a braided line. She doesn't stretch. The width should be 0.2-0.28 mm. This diameter is sufficient for a large bite.

Catching bream on the Feeder: Bottom equipment

The heavier the load mounted in the tackle, the further the cast will be made. The load must match the rest of the tackle, the characteristics of the reel, and the diameter of the fishing line.

Catching bream on the Feeder: Leash

It is better to use several leashes of different lengths for mounting on a spinning rod. Installation is done on the main line.

Catching bream on the Feeder: Feeder

[caption id="attachment_2321" align="aligncenter" width="160"] Catching bream on the Feeder: Feeder[/caption]

Buy Here

The optimal weight is 80-120 grams. It is used by mounting on the main fishing line or attached with a leash. You can make it yourself from a wire in the form of a spring. They also make feeders for fishing from polyethylene pacts and plastic bottles.

Feeding can be carried out without a feeder. To do this, you need to feed the fish by rolling a ball of prepared food and throwing it into the place of fishing so that part of the food breaks into the water and remains on the surface, and part falls to the bottom.

Catching bream on the Feeder: Hooks

[caption id="attachment_2322" align="aligncenter" width="300"] Catching bream on the Feeder: Hooks[/caption]

Buy Here

Remain sharp during the entire fishing. The hook size matches the desired catch.

Catching bream on the Feeder: Alarm

Make a montage to indicate a bite

All components of the Feeder must correspond to the desired catch.

The right rod, the optimal weight of the bream feeder, hooks, reel, and line will help you catch a large specimen.

Bait for bream Catching bream on the Feeder

To choose the right bait and start Catching bream on the Feeder, you need to follow a few rules:

  1. Use a bait that is in the feed. If there is a worm in the feed, then a worm must also be put on the hook.
  2. The bait is chosen based on the food in the pond. If mormysh predominantly lives in the water area, then it should be used as bait on the hook.
  3. Water temperature should also be taken into account. In cold water, the bream feeds on animal bait, and in warm water - on plant food.
  4. Fish are well caught for worms, bloodworms, maggots, peas, foam plastic, pasta, bread dough, hominy, and pearl barley.
  5. Any bait should be changed as often as possible.
  6. When using bread or semolina as a profit, they should be rolled into a ball and put on a hook so that the tip is not visible.
  7. If worms are used, they must move. You need to put them in 5 pieces in bunches so that the hook remains invisible.

Fishing requires a lot of bait. Before Catching bream on the Feeder, you should plant them and check which one will be better to peck at for bream.

Bream feeding

For catching large bream, you need to use the right lure. Feeding is aimed at baiting and holding prey in the place of fishing. For large fish, coarse particles are perfect. The food is not designed to saturate the fish, but to create a cloud in the fishing spot. The lure for bream is sold at any fishing store. You can cook it with your own hands. The basis for complementary foods is broken cookies, crackers, barley, or millet groats. Auxiliary elements for creating food use the following: peas, corn, bloodworm, moreish, worm, salt, garlic, sunflower seeds, and so on.

For the preparation of complementary foods, you can use several recipes:

  • Grind a kilogram of cookies with a blender or mortar to a state of sugar. Add 100 grams of crushed crackers to the crumbs and mix. Add 200 grams of ground sunflower seeds, and 100 grams of oatmeal flour to the resulting mixture. Mix everything together.
  • Put 200 grams of canned corn into boiled millet groats and mix. Before fishing, you can add maggots and cutworms to the porridge.
  • In 400 grams of sunflower cake, put 400 grams of crushed cookies, one glass of semolina, 500 grams of compound feed, or other crushed cereals.

For a beginner, it is advisable to use purchased food for bream. There is a huge selection on the shelves.

There are also several recipes for preparing complementary foods on your own: cereals, crackers, bread, seeds, peas, corn and other products will help you make excellent food for fish.

Catching bream on the Feeder: Determining the habitat of the bream

Catching bream on the Feeder can be done in almost any body of water in the country. The fish loves deep pits with a muddy or clay bottom. In the daytime, it prefers to eat at depth, and in the evening - in shallow water. To catch a bream on a feeder, it is necessary to take into account its habits and feeding habits. It is best to fish for bream in the current. Fast flow should be preferred. There should be holes in the bottom of the reservoir.

How to determine the structure of the bottom:

  • Fishermen often use an echo sounder that shows the structure of the bottom.
  • In the absence of a device, the pit can be identified by other signs: the boundary between the forward and reverse flows may indicate the presence of a pit.
  • You can make a test cast of cargo without additional equipment. The sinker must be dragged along the bottom of the reservoir and pulled out. From the wiring, you can understand where the border of the slope is located, what is the structure of the bottom and whether there is vegetation. Casts are made several times, moving the load to the right and to the left of the intended place.
  • It is necessary to pay attention to coastal vegetation. Such a sign may indicate that the breams are located next to the bush.

The habits of such fish and feeding habits and the right tackle for bream will help any fisherman to catch the desired prey.

Catching bream on the Feeder: Stages of catching bream

How to catch bream? Fishing takes place in several stages: feeding fish, attracting bream, and catching bream.

Before fishing, bream are fed according to the following principle:

  1. For dense feeding, the installation of large feeders will be done.
  2. The lure is made from large particles and soil. Their ratio is 3:1.
  3. The feed should be easy to compact. This is necessary to create a cloud of lures in the water area, which helps to attract fish.
  4. It is best if the feeder will be emptied on the surface of the reservoir. Feed particles will sink from the surface to the bottom. This will
  5. feed a larger area. This method will allow the fisherman to keep the prey in the feeding place for a long time.
  6. At this time, you can feed and catch bream at the same time. To do this, it is necessary to equip the spinning rod with a long leash from
  7. half a meter to one meter.
  8. In the process of catching bream for an hour, you need to make casts every three minutes.

The first stage of catching bream is to feed it. It is important to create a stern cloud on the surface of the reservoir. In the process of feeding, you can begin to fish out the fish.

Catching bream on the feeder in Winter

In winter Bream can be caught on the feeder in winter by using a few simple techniques. The first is to use a small hook, such as a size 10 or 12. Second, use a light line, such as 4-6 lb test. Third, use a small amount of bait, such as a piece of bread or a worm. Fourth, use a slow, steady retrieval. Finally, be patient and wait for the fish to bite.

Catching bream on the Feeder: Bream attraction

To attract the desired prey from the bottom layers of the reservoir, the following rules must be taken into account:

  • A cloud of food is created in the water column.
  • The attention of the fish switches to the hook. The stern part is reduced so that the fish begin to sink to the bottom for food. So the fish will pay attention to the large particles that are in the pond after the first feeding.
  • It is better to choose a medium-sized feeder. Large feeders can frighten the feeding fish. The noise from a medium feeder is much lower than from a large one.
  • It is necessary to compact the feed tightly. So he will reach the bottom of the reservoir.
  • The leash should be 30-35 centimeters long.
  • The donkey is reloaded every three minutes.

The second stage is his attraction to the hook. At this moment, a food cloud is created in the water column, the fish will begin to hunt for large food particles at the bottom.

To catch a standing fish that feeds near the bottom, you must:

  1. Choose a small feeder. Larger sizes will scare the bream.
  2. The leash should be made short, only 12-20 centimeters in length. A feeder that has reached the bottom will attract the attention of a bream, and it will swim toward it. It is best if the hook is located next to the feeder.
  3. Complementary foods are made from crop-fractional particles and soil in a ratio of 1: 3. There should be a small amount of large particles in complementary foods since there are enough of them at the bottom after the first feeding.
  4. A cloud of feeding is located at the bottom of the reservoir. The feed should be compacted as much as possible in the feeders. The soil should be moistened and all force should be applied to fill the feeder, it needs to reach the bottom.

Fishing for bream is the final stage in catching fish. In this case, the smallest feeder with a low content of large particles is used. The hook is located next to the feeder in order to hook the desired prey.

Choosing the right rod and studying the habits of the bream are not the only components of a successful catch. Bream can be caught in a place with a fast current and the presence of holes, and the right lure allows you to catch a larger specimen.

Most of all, the bream prefers the worm, bloodworm, bread, hominy, and much other bait and profit available to any fisherman. Beginners can use complementary foods purchased from a local fishing store. He also does his job very well. Having fed the bream, you can start fishing for a trophy specimen.


Fishing for bream on the feeder creek is easy. The fish are attracted to the movement of the bait, so all you have to do is cast your line and wait for a bite. The key to success is to use the right bait and to be patient. In conclusion, catching bream on the feeder creek is easy if you use the right bait and are patient